Panasonic OMNIVISION PV-DM2791 - Manual (Page 51)

-Important; If a remote control button does not work when pressed, press the DVD button on the remote
and try the button again.
When <S> appears on the screen
while a button is being operated,
it means that the corresponding
operation is prohibited by the unit
or the disc.
• ANGLE Indicator lights up on the unit
when a scene recorded at different
angles is detected.
• The angle number can be set
beforehand so that the angle is
switched whenever ANGLE Indicator
lights up.
AUDIO
SUB TITLE
ANGLE
ZOOM
• Closed captioning will not be
displayed while Picture Zoom is
used. To see subtitles, set the
subtitle feature to ON (see page 50).
• The subtitle cannot be enlarged nor
can it’s position be changed.
• The picture zoom feature does not
work with a Video CD.
• During picture zoom, “ZOOM1" or
“ZOOM2" is displayed on-screen.
• Zooming, on some discs, may result
in poor picture quality, or not operate.
Multiple Angle Viewing (DVD only)
DVDs may contain scenes shot from multiple camera
angles allowing the same scene to be viewed at
different angles. You can view these angles,
if available, using the ANGLE button.
Press ANGLE in Play
mode to display the angle
selection on-screen.
• Display disappears after 5
seconds.
1) Press AT to select the
desired angle.
Number of angle being played back.
Vocal selection for Karaoke discs (DVDA/ideo CD)
Press AUDIO in Play mode to display the
•audio screen.
AUOtO:Z FHnP;«T»fJW>in
1 ) Press AT (or ◄ ►) to
select as shown below.
2) Press ► (or ◄) to set.
(DVD only)
• DVD Karaoke (1 vocal) VOCAL ON—VOCAL OFF
■ DVD Karaoke (2 vocals) VOCAL VI + V2-VOCAL VI-VOCAL V2-VOCAL OFF
•VkteoCD LR-L-R
1_______ I
Picture Zoom (DVD only)
You can enlarge specific portions of a picture and select
the zoom ratio using the ZOOM button on the remote
during DVD playback.
Set Zoom size.
Press ZOOM repeatedly to change display as follows.
• You can enlarge the center portion of the image to one of 2
magnifications.
X 1.0 (ORIGINAL) X1.5 (ZOOM1) X 2.0 (ZOOM 2}
1st press press
3rd press I
Use the A,T,M and ► buttons to move the position up,
down, left and right.
51