Tape operation (continued), Repeat play, To turn “on – Panasonic OMNIVISION PV-DM2791 User Manual
Page 36: Repeat above to select “repeat off, Zero search, Press counter reset at the, Desired position to reset to “0:00:00, Press stop, Press cm/2ero in stop mode to start zero search
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Tape Operation (continued)
Repeat Play
Set to see a recording over and over.
PWY
REPEAT OK
To turn “ON,”
press PLAY/REPEAT
on the unit
repeatedly in Play mode to select
“REPEAT ON”.
To turn “OFF,”
repeat above to select “REPEAT OFF.”
♦ Playback repeats when tape end is
reached or unrecorded portion over 30
seconds is detected.
For repeat play in DVD mode, see page 57,
Zero Search
To quickly return to a specific tape counter location.
1
Press DISPLAY*
during playback
to display the Counter.
Press COUNTER
RESET
at the
desired position to
reset to “0:00:00.”
3
Continue playback, rewind, or
fast forward.
Press STOP.
Press CM/2ERO
in stop mode to
start ZERO SEARCH.
• Unit goes into FF or REW mode and
stops at the last point the Counter was
set to 0:00:00.
PLAY/REPEAT
36
For assistance, please call: 1-800-211-PANA{7262) or send e-mail to : [email protected]