Copy your tapes (dubbing), Connections you’ll need to make, Recording (editing) unit – Panasonic OMNIVISION PV-DM2791 User Manual

Page 19: Insert blank tape with record tab, Select “line” mode, Selecting input mode, Playing (source) vcr recording (editing) unit

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Copy Your Tapes (Dubbing)

.Important: If a remote control button does not work

when pressed, press the

vcb

button on

the remote and try the button again.

Connections you’ll need to make

Playing (Source) VCR

Recording (Editing) unit

OJTG-i

IN

O

R-AUDIO-L VIDEO

* IN FROM

® ANT.

A-

Playback (Source)

1

Insert pre>
recorded tape.

1

...... ^ 4

Recording (Editing) unit

Insert blank tape

with record tab.

Dubbing tapes protected

with Copy Guard will have
poor quality results.

Select “LINE” mode.
See “Selecting Input Mode” below.

Press PLAY then
PAUSE at starting

point to put in
Standby mode.

Press REC, then
Press STILL/PAUSE
immediately to put in
Standby mode.

— (Perform operation of steps 4 and 5 on both units at same time.) —

Press PLAY

to start dubbing.

Press STILLPAUSE

to start dubbing.

Press STOP

to stop dubbing.

Unauthorized exchanging and/or

copying of copyrighted recordings

may be copyright infringement.
Please note that some tapes

cannot be dubbed on this unit.
Also, it is not possible to dub

DVDA/ideo CD/CD to VHS tape
using this unit.

Press STOP

to stop dubbing.

Selecting Input Mode

Method 1:
Press CH

AT.

The display will change as follows.

I

UNI

(CABLE) (TV)

—►125 or 69

Method 2:

^

line

a Press ACTION

for MAIN MENU,

b Press

AT^ ► to select “TV”, then

press SET

for SET UP TV screen,

c Press

AT

to select “INPUT SELECT," and

then

press

SET to select TUNER" or “LINE.”

d Press ACTION

twice to exit this mode.

D

19

Advertising