Search system is, Index search, Press search – Panasonic OMNIVISION PV-DM2791 User Manual

Page 34: Press, Number keys, Press ff or rew, To calculate the index number, Tape operation

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Tape Operation

Search System is...

Each time a recording is made, an invisible index mark is placed on the tape.

When timer recordings are made, program index and information are also included.

These index marks can be used to access or scan recordings.

Index Search

Go directly to the desired recording.

Press SEARCH*

in Playback or
Stop mode to
display INDEX
SEARCH screen.

1

INDEX SEARCH

ENTER INDEX NUMBERil

USINO 1-9 KEYS

FORWARD SEARCH :FF
REVERSE SEARCH;HEW/
NEXT:SEARCH
EX IT:STOP

Press
number keys

to select the

recording number.

• To calculate

number, see below.

INDEX SEARCH

FORWARD SEARCH:FF
REVERSE SEARCHiREW

Press FF

or REW

to start search.

• Play begins at

search and.

To search forward
or back 1 index,

press FF or REW

while screen left is
displayed (10
seconds).

To cancel, press PLAY or STOP.

■ To calculate the Index Number

Example 1:

To go to rec. 2 from rec. 4, enter 3 and press REW.

1

2

3

1

<

5

6

7

Example 2:

To go to rec. 6 from rec. 2, enter 4 and press FF.

Ì

\

1

: ! 1 3 1 4

5 1 6 1 7

NOTE:

\

indicates start points of each recording

34

• Make each entry within 5 minutes,

or the Index Search mode will be
canceled.

• If Index Search is started very dose

to an index mark, that index mark

may not be counted in the search.

For assistance, please call: 1-800-211-PANA(7262) or send e-mail to : [email protected]

Advertising