Panasonic KXFLM600NZ - Manual (Page 103)

Scanning
FLM600/650 Scanner 32
The FLM600/650 Scanner dialogue box is displayed when you click the Scan button on the PANA LINK Main
panel.
FLMSQO/650 Scannet32 m
Image Quality
-JII- ^ F'ine (200 X 200 dpi)
^ c* Line art [400x400 dpi)
’ (interpolated)
f Brightness ~— --------------- ■ —
□ark Light
■ ■ ■ t...r.......■ ■ ..............
r ■ -
....................I................................................. r ■ ■
NORMAL
"Image T'^e ^ ^
. '1^ C' Auto-,
DttMrxjr
)--------------^ - f*" ;Text ri '
: c; Photo
■Status;
Ready
Scan: :!l- ; Cancel | Help
@
You can set up the following items to improve an image file.
(D Image Quality
You can set the image quality to scan.
Fine (200 X 200 dpi):
For a text document with small writing or a document with a simple graphic.
Line art (400 X 400 dpi): For a document with complicated graphics or very small text. (400 x 400 dpi;
interpolated)
(D Image Type
You can set the image type to scan.
Auto:
Sets the image type automatically.
Text: For a text document. (We recommend this as a default.)
Photo: For a photograph.
@ Status
Shows the current state of the unit.
The following messages are displayed depending on the state of the unit.
■D
O
</i
o
Message State
Ready A document is set on the unit. Please click the Scan button for
scanning.
Please insert document to
scan. A document is not set on the unit. Please set a document on the feeder
tray.
Scanning The unit is scanning a document.
FLM600/650 unit power is off.
Plug the unit in and try again. The power of the unit is off or unplugged, or the PC is not connected to
the FLM600/650. Please check.
FLM600/650 unit is warming
up. The unit is warming up. Please wait for a while.
103