Fax - receiving, Receive mode, Problem – Panasonic KXFLM600NZ User Manual
Page 113: Cause & remedy, I cannot select the desired receive mode, Bueebl, Copying, Operations
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Operations
Fax
-
sending (cont.)
Problem
Cause & Remedy
1 cannot make an international fax
call.
• Use the overseas transmission mode (p. 54).
•Add two pauses at the end of the telephone number (p. 35) or dial
manually.
Fax - receiving
Problem
Cause & Remedy
i cannot receive documents.
•The telephone line cord is connected to the EXT jack on the unit.
Connect to the LINE jack (p. 28).
1 cannot receive documents
automatically.
•The receive mode is set to the TEL mode. Set to the FAX ONLY or
TEL/FAX mode.
•The time taken to answer a call is too long. Decrease the number
of rings (p. 62, 69).
The display shows
“CONNECTING.....” but faxes are not
received.
•The incoming call is not a fax. Change the receive mode to the TEL
mode.
The recording image is faint.
•The sender transmitted a faint document. Ask them to transmit a
clearer copy of the document.
Receive mode
Problem
Cause & Remedy
I cannot select the desired receive
mode.
• If you want to set the FAX ONLY or TEL/FAX mode:
—Select the desired mode using feature #77 (p. 68), and
—Press (AUTO ANSWER] to turn on the AUTO ANSWER light.
ON.................. O FAX ON
(RED) '(( j)
• If you want to set the TEL mode;
—Press [AUTO ANSWER] to turn off the AUTO ANSWER light.
BUEEBl
.«FAX ON
OFF-
o
*D
Copying
Problem
Cause&Remedy
The unit does not make a copy.
•You cannot make a copy during programming. Make the copy after
programming or stop the programming.
White lines or black lines appear on
the copied document.
•The white roller is dirty. Clean it {p. 122).
113