Press (directory program, Sending faxes multiple stations – Panasonic KXFLM600NZ User Manual
Page 51
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Sending Faxes
Multiple stations
This feature is useful for sending the same document to selected parties whose telephone numbers are stored
in the One-Touch Dial or EASY DIAL directory. You must program the desired parties into one of the
BROADCAST keys (One-Touch Dial key 1,2, 3 or 4).
Important:
•Before programming, make sure that the desired telephone numbers have been stored in the One-Touch Dial
or EASY DIAL directory.
• Each BROADCAST key can be used as a One-Touch Dial key or as a broadcast key. These functions cannot
be used at the same time.
Programming telephone numbers into the BROADCAST
keys
1
Press (DIRECTORY PROGRAM].
Display:
2
3
4
5
Press one of the [BROADCAST] keys.
DIAL MODE
TA
Press ® or CS to select “BROADCAST”.
Example:
BROADCAST 1
▼
A
Press [START/SET/COPY].
DIR=
00
Enter the stations.
a: Using the One-Touch Dial:
For stations 1-4, press the preset One-Touch
Dial key which is not used as a [BROADCAST)
key.
For stations 5-11, press the preset One-Touch
Dial key.
_______
For stations 12-22, press [LOWER], then
press the preset One-Touch Dial key.
Example:
DIR-Luke
[01]
Using the EASY DIAL directory:
Rotate (EASY DIAL) until the desired name is
displayed.
Example:
John
[01]
Press [ START/SET/COPY ].
Example:
DIR=John
[02]
>To enter other stations, repeat this step (up to
20 stations).
Press [ START/SET/COPY ] after entering
all of the desired stations.
>To program another BROADCAST key,
repeat steps 2 to 6.
Press [DIRECTORY PROGRAM] to exit
the program.
One-Touch
®/®
fSTART/SET/COPY] (EASY DIAL
(DIRECTORY PROGRAM]
Note:
• If you make a mistake while programming,
press f STOP ]. and make the correction.
• Confirm the stored numbers by printing a
broadcast list (p. 129).
0)
o
■O
'<
51