Sending a fax using the one-touch dial, Helpful hints, Fax auto redial – Panasonic KXFLM600NZ User Manual
Page 44: If your unit cannot send a fax
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Sending a fax using the One-Touch Dial
Sending Faxes
Before using this feature, program the desired names and telephone numbers into the One-Touch Dial (p. 37).
1
2
3
4
5
Open the document feeder tray.
Adjust the width of the document guides to the size
of the document.
Insert the document {up to 15 pages) FACE DOWN
until the unit grabs the document and a single beep
is heard.
Display:
STANDARD
If necessary, press (RESOLUTION] repeatedly to
select the desired setting (p. 43).
For stations 1-11
Press the desired One-Touch Dial key.
For stations 12-22
Press [ LOWER), then press the desired
One-Touch Dial key.
Example:
•The unit will start transmission.
Helpful hints:
•You can confirm the stored items on the display (p. 41),
or on the telephone number list (p. 129).
•You can use the EASY DIAL directory to select the
station name instead of using the One-Touch Dial
keys. Rotate (EASY DIAL] until the desired name is
displayed, then press [ START/SET/COPY].
•The connecting tone will be heard during dialing to tell
you the status of the other party’s machine (p. 55).
Note:
•While scanning, do not move the pages which
have already been ejected. A paper jam may
occur. Allow the scanning process to finish
before viewing documents.
Fax auto redial
If the line is busy or there is no answer, the unit will
automatically redial the number up to 2 times.
•This feature is also available for;
—sending faxes using the EASY DIAL directory
(p. 45), and
—delayed transmission (p. 49).
• During redial, the following will be displayed.
Display:
WAITING REDIAL
If your unit cannot send a fax
Verify that the number dialed is answered by the
other party’s machine.
1. Press [MONITOR],
2. For stations 1-11
Press the desired One-Touch Dial key.
For stations 12-22
Press [LOWER] then press the desired
One-Touch Dial key.
►To cancel redialing, press [STOP].
11
44