Connecting to a computer, Caution, Connecting to a computer setup (pc) – Panasonic KXFLM600NZ User Manual
Page 78
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting to a computer
Setup (PC)
To run the Panasonic Multi-Function software (PANA LINK), you need the following software and hardware.
CPU:
An IBM compatible personal computer with a 486 or higher processor (Pentium is
recommended.)
Basic Software:
Microsoft Windows 95 or Windows 98 (Windows 3.1/3.11*—printer driver only)
Memory Minimum: 16 MB (32 MB or more is recommended)
Hard disk:
More than 40 MB available space
Other:
Parallel port
Panasonic Multi-Function fax machine
‘Microsoft Windows operating system Version 3.1/3.11 (hereafter Windows 3.1/3.11)
Connect your personal computer to the fax machine as follows:
Caution:
•When connecting the fax machine to your computer, use the included printer cable for reliable data
communications and compliance with EMI.
• Do not connect the printer cable to the serial port on the computer. This may cause damage to your fax
machine and computer.
78