If a paper jam occurs – Panasonic PV-PD2000 User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

MEMORY

While watching the

television screen, press the

MEMORY Button at the

scene that you want to print.

•The PRINT Lamp lights up.
•To store a new scene in

memory, press the
MONITOR Button so that the
PRINT Lamp turns off. Then,
press the MEMORY Button
again to store a new image in
memory.

PRINT

Check that the PRINT Ump
on the Photo Printer is lit, and
then press the PRINT Button.

• Printing starts.

• During printing, the picture

that is being input from the

memory appears on the

television screen.

•When printing is finished, the

picture that is being input
from the video source

appears on the television
screen again.

■If a Paper Jam Occurs

A “REMOVE JAMMED PAPER” error message is displayed,

and the ERROR Lamp flashes. When this happens, remove the
paper where it has jammed (Q or Q in the figure above).

If the paper cannot be removed, turn off the printer. Then, turn

the printer on again and remove the paper from either O or ©■

0

Rear Paper Removal Port

Q

Print Exit (above the Paper

• If the Paper Cassette is removed while printing is in progress,

paper wiil become jammed in the Print Exit (above the Paper

Cassette) and be unable to be pulled out. Insert the Paper
Cassette and turn the printer on again to discharge the paper.

•When printing starts, the “--------- "display

shown at the top right of the screen changes

to “☆ —

“☆ ------Printing in progress

Printing in progress

Printing is completed when the ☆
mark flashes and then lights up.

(The ☆ mark indicates the printing progress.)

• Do not putt the paper while it is moving

during the printing operation.

• Do not remove the Paper Cassette white

printing is in progress.

• Do not take out the Ink Cassette while

printing is in progress.

• If there is no paper in the Paper Cassette or

if the paper is not inserted properly, the “SET
PAPER AND PUSH [PRINT]’’ message may

appear after the PRINT Button is pressed

(after approx. 25 seconds). When this

happens, reinsert the paper correctly.

• Printing may take more time for continuous

printing of two or more sheets or when
printing at high or low temperatures. Also, if
the Photo Printer becomes hot, the edges of
the printed images may be slightly
discolored.

•Please note that if the paper is bent or

folded, the prints may fall from the Print Exit

(above the Paper Cassette).

•To prevent paper jams, do not allow more

than 10 sheets of paper to accumulate at the

Print Exit.

3

a

c
o

V

■O

>

15

Advertising