Panasonic PV-PD2000 - Manual (Page 39)

ITo Select the Desired Image to be Erased from the Index Display Screen
1. Press the DISPLAY
Button so that the Index
2. At the MENU Screen,
select “DELETE”, and
3. Use the A , and ▼ Buttons to select the
image to be erased, and then press the ENTER
Display is shown. then select [YES]. Button. ^
DISPLAY
o
CARD MENU
PRINT : )
FORMAT : (STD) SET
OSD : [ON] OFF
fS= DELETE :'N0 lYESl—1
[<«»']CHANGE
[ * jSELECT [ENTER]END
ENTER
□ □ □ □
1 DEI-ETE'JHjS~IM.^GE |
iTErmijoecETs i— i i— i
^rCLEA’RjCANCEL '-----------' -----------
or
Use the -4 and ^ Buttons
to select the desired image
to be erased.
ENTER
Press the ENTER Button.
•When the image is erased, the
screen returns to the CARD
MENU. To continue erasing
images, repeat Steps 2 and 3.
NOW DELETING
[•«► JSELECT IMAGE
[ENTER] DELETE
[CLEAR] CANCEL
Remarks,etc.
•Once an image has been erased, it cannot
be restored. Check carefully before
erasing any images.
•Never remove the PC Card or press the
c!) /1 (Power) Button to turn off the Photo
Printer while the image is being erased
(when the ACCESS Lamp is lit up). This
could damage the format of the card and
make it unusable.
• Images can be erased either from the Single­
image Display and Index Display.
3
Q.
m
O
O
Q.
PC CARD
REC
MEMORY
o
Start playback of the video
equipment, and then while
viewing the television
screen, press the MEMORY
Button at the scene to be
recorded on the card.
•The scene is stored in the
Photo Printer memory.
Press the
PC CARD REC Button.
•The scene is stored in the PC
Card from the Photo Printer
memory.
•The ACCESS Lamp lights up
while the image is being
recorded.
•Never remove the PC Card or turn off the
Photo Printer while the image is being
recorded (when the ACCESS Lamp is lit
up). This could damage the format of the
card and make it unusable.
•images cannot be recorded on the PC Card
with MULTI FRAME Mode.
• Data stored in the PC Card undergoes image
compression. In some cases, this can
deteriorate the image when it is stored on the
card.
• Images are stored in the PC Card without the
setting adjustments made to the picture
quality.
•Blurred images are stored without any
adjustments.
•Titles are not stored.
•Wide images cannot be stored in wide format
in the PC Card.
39