Title, Printing with trimming frame, Press the menu button – Panasonic PV-PD2000 User Manual
Page 42: Use the ▼ button to select “frame, O when “select” is chosen
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Printing with Trimming Frame
Title
Printing with Trimming
Frame
A trimming frame can be made in one of two
possible ways.
O
Selecting from one of the preset
trimming frames: SQUARE, OVAL,
FROST, or HEART
(The size of the SQUARE trimming frame
can be adjusted.)
•Trimming can be used to cover black
bands appearing at the top, bottom or
around the image (such as for movie
scenes).
0 Capturing with your Video Camera a
trimming frame that you created
42
Press the MENU Button.
Example.Video Input
MENU
[QFPRIMT
------ 1
FORMAT
[STD] SET
PICTURE
[STD] SET
FRAME
[OFF] SET
TITIE
[OFF] SET
OSD
[ON] OFF
WIDE
[AUTO] ON OFF
[^►ICHANGE
[ ^ ISELECT
[ENTER] END
Use the ▼ Button to select
“FRAME”.
MENU
: 1
FORMAT
:[STD]
SET
PICTURE
:fSTD)
SET
FRAME
i'lOFFl
SET 1
TITLE
:[OFF]
SET
OSD
:[0N)
OFF
WIDE
: [AUTO] ON OFF
[< ^
►]SELECT
[ENTER]END
O
When “SELECT” is
chosen
Select one of the four trimming
frames: SQUARE, QVAL,
FROST, and HEART.
Then, select [YES].
•The size of the SQUARE
trimming can be adjusted by
using the ◄, ►, A, and ▼
Buttons.
If “OVERLAY” was selected in Step 4, press the ENTER
Button.
FRAME
SELECT
OVERLAY
To perform inside-outside
reversal, use the ▼ Button to
select “IN-OUT”. Next, use the ^
Button to select [YES], and then
select “INSIDE” or “OUTSIDE”.
r№TI№UT : MO'
:[YES1ZI
* ►ISELECT [ENTERJEND