Use the ▼ button to select “multi, Press the print button, To erase stored pictures – Panasonic PV-PD2000 User Manual
Page 23: To abort the setting process, Remarks, etc
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Use the ▼ Button to select
“MULTI”.
FOR
STD
ALBUM
VIAT
1
-----
9
------
16
-----
1
MULTI :[<?
RTRnflF
[ M ^
►ISELECT
[ENTER] END
B
Press the PRINT Button,
•Printing starts.
<3
or
Use the ^ and ^ Buttons to
select the desired number of
mini-frames.
FOR
STD
ALBUM
l^MULTl LW
STBCRF
\AAT
C’i
t
►ISELECT
[ENTER] END
Remarks, etc.
■To Erase Stored Pictures
Press the MONiTOR Button when the PRiNT
Lamp is iit.
(To store new pictures to repiace the erased
pictures, press the MONiTOR Button so that
the PRiNT Lamp turns off, and then press the
MEMORY Button.)
■To Abort the Setting Process
Press the CLEAR Button once when the
PRINT Lamp is turned off.
•The PRiNT Lamp lights up and turns off each
time the MONITOR Button is pressed.
• If you press the MONITOR Button again after
printing is complete, the display returns to the
MEMORY Screen, allowing you to print the
same pictures again.
•It is also possible to store the image that you
want to print in memory first, and then select
the “MULTI” printing settings on the MENU
Screen.
a
c
o
0)
■o
23