Panasonic PV-PD2000 - Manual (Page 31)

MEMORY
Press the MEMORY Button.
•The image is marked with a
O mark.
•Pressing the MEMORY
Button again wiil erase the
O mark.
• Repeat Steps 2 and 3 to
select a number of images.
AUTO PRINT
Slide the AUTO PRINT Lever.
•The PRINT Lamp flashes
when printing starts.
Remarks,etc.
•The images are printed in the order they
were seiected in Steps 2 and 3,
•When printing is finished, the O mark is
erased, and the memory is reset.
•After storing the images in memory, setting
the INPUT SELECT Switch to “VIDEO” or
turning the power off will reset the memory.
■To Print All the Images Recorded in the
Card
Slide the AUTO PRINT Lever.
(Steps 1,2, and 3 are not necessary.)
■To Abort Printing
Press the CLEAR Button.
Although the image being printed will not stop,
the following printing images wiil be canceled.
3
Q.
(D
o
o
Q.
31