Panasonic PV-PD2000 - Manual (Page 54)

Before Requesting Service
f
Symptom Cause
\
Remedy
The power cannot be
switched on.
•The power plug is not plugged in
correctly.
• Insert the power plug all the way into
a wall outlet.
No picture appears on the
television screen.
(video input)
•The external video source is not
connected properly.
•Connect the external video source
correctly, (p.9)
•A device is connected to an S-
VIDEO IN Socket, but you are
attempting to use a VIDEO IN
Socket.
• Unplug the S-Video Cable
connected to the S-VIDEO IN
Socket.
•The INPUT SELECT {VIDEO / PC
CARD) Switch is set to “PC CARD”.
•Set to “VIDEO”. (p.14)
The printer does not print. •The Ink Cassette is not oriented
properly, or was not pushed all of
the way in.
• Insert the Ink Cassette correctly.
(P-13)
•There is slack In the ink film. •Take up the slack in the ink film.
(P-12)
•The Paper Cassette Is not oriented
properly, or was not pushed all of
the way in.
• Insert the Paper Cassette correctly.
(P-13)
•The paper was loaded upside-down. • Load the paper correctly. (p.12)
•The internal temperature of the
printer is too high.
•Wait.
Printing is not of the
expected quality.
•The paper being used is not of the
specified type.
•Use the specified paper.
(P-11)
•The paper was not loaded correctly. •Load the paper correctly. (p.12)
•The ink film or paper is dirty. •Use clean supplies.
•Condensation has formed. •Wait.
The printed colors are not
right.
•The print image has not been
adjusted correctly.
•Adjust the print image correctly.
(P-18)
The printed pictures are
distorted.
•The printer is located near a television,
video game machine or other source
of electromagnetic waves.
•Move the printer so that it is at least
one meter away from the television,
video game machine, etc.
•The printer is located near a stereo
speaker, large motor, or other
source of a strong magnetic field.
•Move the printer away from the
device generating the magnetic field.
Pressing the MEMORY
Button does not store the
picture in memory.
•The MENU Screen is displayed. •Press the ENTER Button. (p.17)
•A picture stored in memory is
displayed on the television screen
due to the MONITOR Button
settings.
•Press the MONITOR Button to
display the video source picture on
the screen. (p.15)
The printer does not
respond when a button is
pressed.
•The interna! temperature of the
printer is toohigh.
•Wait.
•Printing is in progress. •Wait until printing is complete.
Paper jams occur
frequently.
•More than 25 sheets of paper have
been loaded in the Paper Cassette.
•Do not place more than'25 sheets of
paper in the Paper Cassette.
•More than 10 sheets of paper have
accumulated in the Print Exit.
• Do not allow more than 10 sheets to
accumulate in the Print Exit.
•The paper is creased or curled. • Do not use creased or curled paper.
54