Panasonic PV-PD2000 - Manual (Page 55)

Symptom Cause
s
Remedy
The MENU Screen does
not appear.
•The Photo Printer is not connected
properly to the teievision.
•Connect the printer to the television
correctly, (p.9)
• Printing is in progress. •Wait until printing is complete.
No picture appears on the
television screen.
(PC Card input)
•The CF Card or Smart Media is not
correctiy inserted in the adapter.
• Insert correctly, (p.26)
•The PC Card is not correctiy
inserted in the printer.
• Insert correctly, (p.27)
•The iNPUT SELECT {ViDEO / PC
CARD) Switch is set to “ViDEO”.
• Set to “PC CARD", (p.28)
•A card with an incompatibie format is
being used.
•This card cannot be used with this
printer.
it takes time for the image
to appear.
• Depending on the image system for
storing the images in the PC Card
and its capacity, it can take 20 to 30
seconds to dispiay the image.
•This is not a malfunction.
Muitipie images from the
PC Card cannot be aii
printed at once.
•Muitipie images are not stored in the
PC Card.
• Use a PC Card with multiple images
stored.
images in the PC Card
cannot be erased, or
cannot be aii erased at
once.
•There are no images stored in the
PC Card.
•You cannot erase.
•The image is set to write-protect in
the camera or computer.
•Change the write-protect setting in
the camera or computer, and then
erase.
• images can only be erased one at a
time.
-
Video images cannot be
recorded in the PC Card.
•The iNPUT SELECT {ViDEO / PC
CARD) Switch is set to “PC CARD”.
•Set to “VIDEO”, (p.38)
•The PC Card is set to write-protect. •Set the PC Card to write-enable.
•The PC Card is fuli. • Either erase unneeded images
(p.38) or use another PC Card with
sufficient capacity.
The video image was
stored in the PC Card, but
the image is not clear.
• in some cases, image compression
may deteriorate the quality of image
when storing.
•This is not a malfunction.
The printer cannot be
used as a computer
printer.
•The printer and computer are not
connected correctly.
•Connect the printer and computer
correctly, (p.46)
•You are not using the proper PC
Connection Cable for your computer.
• Use the PC Connection Cable
(supplied) for your computer, (p.46)
•The printer driver software is not
installed or is not installed correctly.
• Refer to the separate Printer Driver
Manual.
___________________________
55