Panasonic SC-DV100 - Manual (Page 19)

SKIP
I I E A S T A S I A I 1 6 O C E A N I A 1
1 2 S O U T H A S I A 1 1 7 N O R T H A M E R I C A 1
1 3 M I D D L E E A S T 1 4 » 1 8 C E N T R A L A M E R I C A 1
1 4 A F R I C A 1 1 9 S O U T H A M E R I C A 1
1 5 E U R O P E 1
V ____ : __________________ L -
n o A N T A R C T I C 1
^ ________________________ J
MENU
0
SUBTITLE
TITLE o
RETURN
o
Playing discs
About menu operations
When the menu continues onto another screen E3
After step B on page 18, press [SKIP ►►!].
(Skip buttons may not be effective depending on the disc.)
•To return to the previous menu screen
Press [hW SKIP],
• For operation, refer also to the jacket of the disc concerned.
To return to the menu screen B
by remote control only
With some discs, playback may start without showing the menu
screen.
To show the menu screen, do the following.
• DVD
Press [TITLE], [MENU] or [RETURN].
(Which button is pressed depends on the disc.)
• Video CD
Press [RETURN].
The disc continues to rotate while the menu is displayed even after
the unit has finished playing a particular item. When no further selec­
tions are to be played, be sure to press [■] to clear the menu display.
To enjoy Video CDs with playback control without using
menus
Refer to the disc jacket concerned for the track numbers.
© Press [■] after the menu screen appears.
“PBC" disappears on the display.
(g) Press the numeric button(s) to select the desired track.
Play begins.
I
Chapter Play function (DVD only)
This function plays a few seconds of each chapter from the beginning
of the title up to the point where operation was stopped at the second
chapter or more.
When you play a DVD with chapters recorded on it, stop the disc:
© Press [►] (play).
The message, “PRESS PLAY to chapter preview”, is shown on
the TV.
( 2 ) Press [►] (play) again while the message is on the TV.
After the chapter play, normal play resumes from the point that the
disc was stopped.
5
0)
6
8
8
S
Q
When “0" appears on the TV monitor when a button is pressed
It indicates the corresponding operation is prohibited by the unit or
the disc.
I
Q
When “96 kHz 24 bit" appears on the display
This message indicates that the disc being played is a disc with high
quality sound recorded with a sampling frequency of 96 kHz and
24 bits.
When “NO PLAY” appears on the display
It indicates that the disc being played does not correspond to the sys­
tem, disc play cannot be done. (^ page 6)
RQT5056