Panasonic SC-DV100 - Manual (Page 5)

Concerning the remote control
Listening caution Battery installation
Selecting fine audio equipment such as the unit you’ve just pur­
chased is only the start of your musical enjoyment. Now it’s time to
consider how you can maximize the fun and excitement your equip­
ment offers. This manufacturer and the Electronic Industries Associ­
ation’s Consumer Electronics Group want you to get the most out of
your equipment by playing it at a safe level. One that lets the sound
come through loud and clear without annoying blaring or distor­
tion—and, most importantly, without affecting your sensitive
hearing.
We recommend you to avoid prolonged exposure to excessive
noise.
Sound can be deceiving. Over time your hearing “comfort level”
adapts to higher volumes of sound. So what sounds “normal" can
actually be loud and harmful to your hearing.
Guard against this by setting your equipment at a safe level
BEFORE your hearing adapts.
To establish a safe level:
• Start your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and
clearly, and without distortion.
Once you have established a comfortable sound level:
• Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage
or loss in the future. After all, we want you listening for a lifetime.
I
4)
ui
3
£
q>
GQ
•Align the poles {© and ©) properly when inserting the batteries.
• Do not mix old and new batteries, or batteries of different types
(manganese and alkaline, etc.).
• Never subject batteries to excessive heat or flame; do not attempt
to disassemble them; and be sure they are not short-circuited.
• If the remote control is not to be used for a long period of time,
remove the batteries and store them in a cool, dark place.
• Do not attempt to recharge alkaline or manganese batteries.
• Do not use rechargeable type batteries.
Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
If electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact with any
part of your body.
If the battery lid comes loose
Slide the lid back into place horizontally.
Correct method of use
Remote control
signal sensor
•Aim the remote control's transmission window toward the unit's
sensor. Avoid any obstacles.
• Be sure the transmission window and the unit’s sensor are free from
dust. Excessive dust might affect its performance.
•This unit may not operate correctly if direct sunlight or another
strong light source strikes the receiving sensor of this unit. If there is
a problem, place the unit away from the light source.
• Never place heavy items on top of the unit.
• Do not disassemble or reconstruct the unit.
• Do not spill water or other liquids into the unit.
сOT5056