5ef the voltage b, Except for u.s.a., canada and china, Installation – Panasonic SC-DV100 User Manual

Page 7: Locating the components, Placement of center/surround speakers, Set the voltage

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

3 ò

n

the tuner amplifier

2q

127V <-M 10V +-+ 220V 230V-240V

© DVDA/ideo

© Sound

CD/CD changer

processor

(SL-OV150 or DV100)

(SH-DV150 or DV100)

I

I

® Cassette deck (RS-DV150) ® Tuner amplifier

(SA-DV150 or DV100)

© Sound processor

(SH-DV150 or DV100)

© Tuner amplifier

(SA-DV150 or DV100)

® DVDA/ideo CD/CD changer

(SL-DV150 or DV100)

® Cassette deck {RS-DV150)

:

5ef the voltage B

Except for U.S.A., Canada and China

Be sure to disconnect the AC power supply cord before setting the

voltage.

Use a flat-head screwdriver to turn the voltage selector (on the bot­

tom of the tuner amplifier) to the appropriate position for the area in
which this system is used.

If the power supply in your area is 115 V orl 20 V, set it as follows:
• F o r l l S V : s e t t o l l O V
• For 120 V: set to 127 V
Note that this will be seriously damaged if this setting is not made

correctly.

Installation

Locating the components

Side-by-side set-up B
Stacking B

Keep your speakers at least 10 mm {'V32") away from the system for
proper ventilation.

Placement of center/surround speakers

Center speaker

Place the center speaker above a TV, as close to it as possible.

Do not place the center speaker on this system as sound quality will
be affected.

Surround speakers

We recommend that surround speakers be placed on the side of or
slightly behind the listener, and about one meter higher than ear

level.
Place the speakers with the Panasonic logo facing toward the listen­
ing position.

For your reference

Even if you are forced to put your surround speakers on top of your

front speakers, this unit still allows you to enjoy surround effects

(^ pages 45, 49, “Virtual rear surround effect").

Attaching to a wall Q
Set speaker onto screws and slide through bracket to lock into posi­
tion.

The wall or pillar on which the speaker systems are to be attached

should be capable of supporting a weight of 5 kg.

A

Caution

• Use the speakers only with the recommended

system. Failure to do so may lead to damage
to the amplifier and/or the speakers, and may

result in the risk of fire. Consuit a quaiified

service person if damage has occurred or if
you experience a sudden change in perfor­

mance.

• Do not attempt to attach these speakers to

walls using methods other than those de­
scribed in this manual.

If irregular coloring occurs on your TV

These speakers are designed to be used close to a TV, but the
picture may be affected with some TVs and set-up combina­
tions.

If this occur, turn the TV off for about 30 minutes.

The TV’s demagnetizing function should correct the problem.

If it persists, move the speakers further away from the TV.

o

3

£

0)

CQ

RQT5056

Advertising