Turning the power switch on, Turning the power switch on -13 – Panasonic KXF150 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Turning the POWER switch on
Before turning the POWER switch on, confirm the following;
—All connections are completed.
—The cassette tape and the recording paper are installed properly.
—The handset is on the cradle.
1. Turn the
POWER
switch to the “I" (ON) position.
2. When you turn on the unit for the first time, the error code “E-30" will be displayed.
This shows that the greeting message is not recorded.
To record your greeting message, see pages 1-14 and 1-15.
If the greeting message is not recorded, you cannot use the unit properly as both an answering
device and a facsimile.
NOTES:
• If the ALARM indicator lights when you turn the POWER switch on, confirm that the covers are
closed firmly.
• If the PAPER OUT indicator lights, install the recording paper properly.
See pages 1-10 and 1-11.
1-13