Panasonic KXF150 - Manual (Page 36)

Selecting the number of rings to answer in the ANS/FAX
mode
When in the ANS/FAX mode, the unit will automatically answer on the first ring when receiving a
call.
If you wish to change the number of rings to answer a call, you can choose among the following:
0: Toll Saver {see page 1 -29).
1: The unit answers on the first ring (default).
2: The unit answers on the second ring.
3: The unit answers on the third ring.
4: The unit answers on the fourth ring.
The unit will not ring (RINGER OFF).
HELPFUL HINTS:
• If you wish to have the opportunity to pick up the handset before the call is answered by the unit,
set the number of rings to “3” or “4”.
• If you find there is difficulty in fax receiving from machines that have an automatic transmission
feature, set the number of rings to “1 ”.
•To confirm from the remote phone whether a new incoming message has been recorded or not
(see pages 4-19 to 4-24), select the Toll Saver position. This will save you the toll charge for the
3
[ 1 ] [ 2 ] 3 ]
[ cw 4 ] [j*i.
5
] [****° 6 j
[pHs yj I Tu^8 ] [«»''9]
C3E3IZ3
Press the PROGRAM button.
The display shows “P-
Press #, then press 05.
The display shows “P-F05 1 ”.
Press the number of the selection you desire.
Setting selections are:
0: Toll Saver
1
2
3
4
one ring
two rings
three rings
four rings
Ringer Off
Press the SET button to store your selection into
memory.
The display shows “P-
(continued)
1-28