How to set up, Notes, How to set up -19 – Panasonic KXF150 User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
How to set up
To set up your unit, proceed as follows.
1.
Press the
PROGRAM
button.
The display shows “P-
2. Press #, then enter the code number you wish to set using the dial keypad.
Refer to the lists on pages 1-17 and 1-18.
3. Enter desired choice or data.
4. If you entered “#26”, “#27”, “#28”, “#50” and “#99", press the
START
button.
Otherwise press the
SET
button to store your selection.
5. Press the
PROGRAM
button to end the operation.
NOTES:
•When you lose your procedures while programming, press the HELP button. You will be able to
print information about how to set up. See pages 1 -33 and 1 -34.
•To correct an error while programming, press the STOP/CLEAR button then correct input.
•To cancel programming on the way, press the PROGRAM button. The display shows the
current time.
Display
1-19