Panasonic KXF150 - Manual (Page 94)

Voice Contact
Initiating voice contact
While transmitting or receiving a document, you may wish to speak to the other party. If the other
party’s unit is equipped with a voice contact feature, you can initiate voice contact and notify the
other party that you wish to speak after the transmission/reception is completed. The other party’s
fax will emit a distinctive ring that indicates that a voice conversation is required. This saves the extra
expense and time of making a subsequent telephone call to discuss information sent over the fax.
1 Press the SP-PHONE button or lift the handset while
transmitting or receiving the documents.
When the other party answers, start speaking using the
handset.
—If you initiate voice contact while transmitting
documents, you can speak after all the documents
have been transmitted.
—If you initiate voice contact whiie receiving
documents, you can speak after receiving the current
page of the documents.
Receiving a request for voice contact
If the other party initiates voice contact during transmission or reception, your unit will emit a
distinctive ring after the fax is completed.
When the unit rings, lift the handset and start speaking.
If you do not answer within 10 seconds after hearing several rings indicating the request for voice
contact, one of the following occurs:
—When the unit is in the ANS/FAX mode, it plays back your greeting message and records the
voice-message on the tape.
—When the unit is in the TEL7FAX mode, the line is disconnected.
—When the unit is in the FAX mode, the line is disconnected.
—When the unit is in the TEL mode, the line is disconnected.
4-28