Re-recording a greeting message, Note, Re-recording a greeting message -24 – Panasonic KXF150 User Manual
Page 90
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Re-recording a greeting message
You can change the content of your greeting message from a remote telephone.
1
Call your unit, then dial your REMOTE TAD ID while the
greeting message is playing.
Press 7 to start re-recording after hearing the beeps that
indicate the number of recorded messages.
After hearing a long beep, speak clearly and loudly for
up to 16 seconds.
When finished, press 9.
The new greeting message is played to confirm the
change.
NOTE:
If you pause for over 2 seconds while recording, the unit beeps and stops the greeting message
recording. In this case, repeat
from
Step 2 within
10 seconds.
4-24
Advertising