Setting the message alert, Setting the message alert -27 – Panasonic KXF150 User Manual
Page 93
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the Message Alert
When this feature is on, the unit will let you know with an alert if a caller’s message has been
recorded in the unit or not.
When a new message is recorded in the ANS/FAX mode, a slow beep will sound and the indicator
will blink. When you hear the beep sound, play back the message(s), the beep sound will stop and
the indicator will stop blinking.
To set the message alert:
Press the PROGRAM button.
The display shows “P-
Press #, then press 22.
The display shows “P-F22 2”.
Press
1
to activate this feature.
Setting selections are:
1: ON (activate this feature)
2: OFF (deactivate this feature)
Press the SET button to store your selection into
memory.
The display shows “P- ”.
Press the PROGRAM button to end the operation.
4-27