Panasonic DMR-T3030 - Manual (Page 15)

STEP 6 Television operation
2
DVD, TV
A , V,CH
+, -.VOLUME
You can control televisions by entering the remote control code.
1
Refer to the chart below for the code
for your television.
2
Press and hold [6, POWER TV] and
enter the two-digit code with the
numbered buttons.
• For example; 01, press [0] -* [1 ].
• Test by turning on the television and changing channels.
Repeat the procedure until you find the code that allows
correct operation.
una
• If your television brand is not listed or if the code listed for your
television does not allow control of your television, this remote
control is not compatible with your television.
• This remote control works with most recently manufactured televi­
sions, but may not be able to control older models.
Code No. Manufacturer
01 Panasonic/National QUASAR
02 Panasonic/National QUASAR
03 MAGNAVOX SYLVANIA PHILIPS (RC-5)
04 ZENITH
05 THOMSON RCA GE
06 SHARP
07 SHARP
08 SONY
09 TOSHIBA
10 SANYO FISHER
11 JVC
12 HITACHI
13 MITSUBISHI
14 SAMSUNG
15 GOLDSTAR/LG
16 GOLDSTAR/LG
17 GOLDSTAR/LG
18 SAMSUNG
19 SAMSUNG
'O
§
a
(n
Oj
.c
■tM ■fcil
Q)
I Operation
Point the remote control at the television.
Operation Button
On and off [6, POWER TV]
Video input mode [TV/VIDEO]
Channels
(Switch [DVD, TV] to ‘TV".)
[ a , V , CH]
or
Numbered buttons
Example;
Channel “5”: [0] -¥ [5]
Volume [+, -, VOLUME]
-;RQT6636