Panasonic DMR-T3030 - Manual (Page 30)

Timer recording
Preparation
• Ensure the clock (and guide channels for VCR Plus+ recording,
-►page 13) are set correctly.
• Insert a disc for recording (make sure there is enough room for the
program you are going to record plus a little extra).
Using VCR Plus+ codes to make timer
recording
Entering VCR PIus+ codes is an easy way of programming the unit
for recording. You can find these codes in newspapers and maga­
zines. You can enter up to 16 programs up to a month in advance.
1
Press [VCR PlusH-].
■; -i'- n'
Press the numbered buttons to enter
the VCR Plus+ code.
Press [-^] to move back to correct a digit.
?iS3Kl!S?»
a m a s a m u m
3
Press [ENTER].
The timer recording setting screen appears. Confirm the pro­
gram and make corrections if necessary using [ A , T , ►].
..... ”■
<sm ■. ..( e £® .
The current recording mode (shown on the unit’s display) is
automatically selected. In case where the recording mode
has already been set to XP, the recording mode will be auto­
matically changed to FR mode.
When you press [ENTER] V
The timer recording list appears.
ai2$TUE12:53 PH
(iign fiDf- (ii3j
01 39 4/1H0N 4:ZDI^ 5:10PM SP
Naw Timer Praaram
0103?,
pm
CiiiM Q
Displayed if the recording can fit in the remaining space on
the disc.
Repeat steps 1-3 to program other recordings.
4
Press [RETURN].
The timer recording list disappears and the message “TURN
RECORDER OFF FOR TIMER RECORDING" is shown on
the television.
5
Press
[(!),
DVD POWER].
Ensure “E” lights on the unit’s display.
To release the unit from recording standby
If you want to record something else before the program start time,
for example:
Press [ c !J, DVD POWER].
The unit turns on and goes out.
• Be sure to press [c!), DVD POWER] to return the unit to standby
mode before the scheduled recording time. Timer recording wilt
work only if is displayed.
To stop recording when recording has already
begun
Press [■], then [ENTER] within 5 seconds.
Recording stops. Recording standby is also canceled if there are
other timer recording programs. Be sure to press [tl), DVD POWER]
to put the unit on timer recording standby.
• The actual time recorded may be longer than the program itself
when television programs are recorded using VCR Plus-H.
• “Invalid Entry” is displayed when you enter the wrong code.
Reenter the code.
• “Alt timer programs are occupied." appears if there are already 16
programs.
RQT6636