Panasonic DMR-T3030 - Manual (Page 32)

Timer recording
■
OJ
c
■§
o
o
£
0>
E
To check programs
1] Press [PROG/CHECK].
The timer recording list appears.
S&ra -
ifh (5I!m ram m "CBi
• 01 64 ABC 3/26 THE 1:19PM 1:22 PM LP Enable
® OZ £4 ABC SUN-SAT 2:30 PM 2:40 PM IP
@ 03 64 ABC 3/26TUE 2:30 AM 3:30 AM SP talaff
.
□ iD4 64 ABC 3/2SNION 9:00 AM 10:00 AM SP
© 05 64 ABC 3/2SKt01i 8:00 AM 9:00 AM SP
® 06 64 ABC 3/25M0K 10:00AM 11:00 AM SP
N«w Timer Program
SnEP'/pjiSEE
To change or delete the program
1
2
Press [PROG/CHECK].
The timer recording list appears.
Press [ A , T ] to select the program.
• You may also select programs by inputting a 2-digit number
using the numbered buttons.
• Press [◄, ►] to move to the page preceding or following the
one on display.
Press [CANCEL] or [ADD/DLT] to
delete,
You cannot delete programs that are currently recording.
or press [ENTER] to change.
The timer recording setting screen appears.
If you pressed [ENTER] in step 3,
Move through the items with [ > ] and
change the settings with [ A , T ] and
press [ENTER].
In the case of programs in the process of being recorded, it is
possible to alter only the finish time.
Press [PROG/CHECK] or [RETURN].
The timer recording list disappears and the message 'TURN
RECORDER OFF FOR TIMER RECORDING” is shown on
the television.
To put the unit on timer recording standby
Press [(!), DVD POWER].
The unit turns off and "B” lights on the unit’s display.
Icon explanations
© The times overlap those in another program.
• This program is currently recording.
O The disc was full or the maximum number of programs or scenes
was reached so the program failed to record.
^ The material was copy-guarded so the material failed to record.
O The program failed to record for some other reason.
Message displayed in the CHECK line
Enable: Displayed if the recording can fit in the remaining space
on the disc.
(Date): For recordings made daily or weekly, the display will
show until when recordings can be made (up to a maxi­
mum of one month from the present time) based on the
time remaining on the disc.
! ; It may not be possible to record because of write protec­
tion, because there is no more space left or because the
number of possible programs has reached its maximum.
Please check the disc.
For your reference
Programs that failed to record are displayed gray. They are deleted
at 4 a.m. two days later.
2
Press [PROG/CHECK] or [RETURN].
The timer recording list disappears and the message TURN
RECORDER OFF FOR TIMER RECORDING” is shown on
the television.
To put the unit on timer recording standby
Press [Cb, DVD POWER].
The unit turns off and “B” lights on the unit’s display.