Connecting an amplifier or system component – Panasonic DMR-T3030 User Manual
Page 47
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting an amplifier or system component
This model can play Dolby Digital, but only in two channels. This model does not have a DTS decoder. You must connect a unit with a
Dolby Digital or DTS decoder to enjoy surround sound.
C
.o
г
<i>
CL
О
■О
q>
о
с
§
■о
Recording to digital recording equipment or cassette tapes
Digital recording
You can record the digital signal directly to digital recording equipment
(-►Connection Q above).
• With DVD, the following conditions must be met: © the disc doesn’t
have protection preventing digital recording, and ® the recording
equipment can handle signals with a sampling frequency of 48 kHz.
• You cannot record DTS signals.
When recording DVDs, make the following settings.
V.S.S.: OFF (-►page 43)
PCM Down Conversion: On (-^page 51)
Dolby Digital: PCM (-►page 51)
DTS: Off (-►page 51)
Analog recording
You can record to a cassette deck or other recording equipment
(^Connection above).
There are no limitations on recording analog signals as there are with
digital signals.
ROT6636