Panasonic DMR-T3030 - Manual (Page 2)

■o
a
a
O)
O)
c
S
0>
C3
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORM­
ANCE OF PROCEDURES OTHER THAN THOSE SPECI­
FIED HEREIN MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOUR­
SELF. REFER SERVICING TO QUALIFIED PERSONNEL.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR PRODUCT DAMAGE, DO NOT
EXPOSE THIS APPARATUS TO RAIN, MOIS­
TURE, DRIPPING OR SPLASHING AND THAT
NO OBJECTS FILLED WITH LIQUIDS, SUCH
AS VASES, SHALL BE PLACED ON THE
APPARATUS.
Âk
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
A
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS
INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL
A
A
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated “dangerous voltage’’
within the product’s enclosure that may be of suffi­
cient magnitude to constitute a risk of electric shock
to persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the ap­
pliance.
FCC Note:
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential instal­
lation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accor­
dance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or televi­
sion reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
FCC Caution: To assure continued compliance, follow the
attached installation instructions and use only shielded inter­
face cables when connecting to peripheral devices.
Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s author­
ity to operate this equipment.
This device complies with Part 15 of the FCC Rules. Opera­
tion is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
- VISIBLE AND INVISIBLE LAS^R RADIATION WHEN OPCM.
AVOID DinECT EXPOSURE TQ BEAM._______ (FQA 31 CFR)
AVOlO EXPOSURE TO BEAM.
k UDSÆTTELâE FOR BTRAUNO.
VARNING - 8VNLIO OCH OSYNUG LASERSTTU ln NG NAR OENNA DEL
__________ AflÓpPMAD. BETRAICTA EJ STRALEH._______
i EKSPONERING FOR 8THÀLEN.
VORSICHT " StCHTBARE UND UNSICHTBAflE L>SERSTRAHLDN(3,WEHN ABDECKUNG
__________ geöffnet , nickt dem strahl AU3SETZEN_____
as (Inside of product)
RQT6636