Panasonic KX-F560 - Manual (Page 36)

8. Advanced Operations
Delayed transmission
This unit can send fax documents automatically at a specific time. This will allow you to take advantage of
low-cost calling hours offered by your telephone company.
Delayed transmission can be programmed up to 24 hours in advance.
o
® CDO
Insert the documents
FACE DOWN until a
beep tone is heard.
Press MENU.
1.SYSTEM SET UP
Press #, then 25.
DELAYED XMT
Press START/SET.
MODE = OFF [AT
Press A or T to select
“ON”.
MODE=ON AT
—If this feature is not
required, select "OFF”
Press START/SET.
N0.=
©
cpcpcp
CD®CD
CDObCE)
CDCDcIi
CDCi)®
Enter the phone number
using one-touch dialing,
speed dialing or a full
number.
Press START/SET to
store the number.
—When using speed
dialing, press
START/SET again.
TIME=12:00AM
Enter the transmission
start time.
Example: 11:00PM
Press 1100, then press #
to select PM.
—To select AM, press -X-.
Press START/SET to
store the setting.
Press MENU to end the
program.
—When the
programmed time has
come, the unit will
automatically start
transmission.
Note:
• If there is no answer or the line is busy, the unit will automatically redial the number (see item 7 on
page 56).
• You can receive, transmit and copy documents while the delayed transmission is set.
• If the programmed start time occurs during a power failure, delayed transmission will be attempted soon
after power is restored.
• When transmit polling (see page 35) is set to ON, delayed transmission is not available.
• You can use the electronic telephone directory to enter a phone number (see page 34).
36