Panasonic KX-F560 - Manual (Page 40)

8. Advanced Operations
TONE, FLASH and PAUSE buttons
TONE button
The TONE (■)(■) button is used when your line has rotary pulse dial service.
Pressing the button allows you to change temporarily from pulse to tone mode
during a dialing operation.
When you hang up, the unit will automatically return to pulse mode.
Note:
• TONE can be stored into a phone number for automatic dialing.
FLASH button
PAUSE button
The FLASH button will function as the hookswitch on an ordinary phone. If you
misdial or dial another phone number, press the FLASH button firmly. Listen for
the dial tone, and dial the next phone number.
Also, pressing the FLASH button allows you to use special features of the host
exchange (if connected) or local telephone company services, such as call
waiting. For further details, contact a supplier or your local telephone company.
Note:
• FLASH can be stored into a phone number for automatic dialing.
Pressing the RED1AL7PAUSE button causes a dialing delay in the dialing
sequence.
Example-1: When your unit is connected to a host exchange, insert a pause as
follows to get an outside line.
Example-2: If a transmission error occurs when making an overseas
transmission, add two pauses at the end of the phone number, and
try again.
Note:
• PAUSE can be stored into a phone number for automatic dialing.
40