STIEBEL ELTRON S-Power PERFORMANCE SERIES Heat Pipe Collectors - Manual (Page 13)

1
10 11
14 13 12
Footer:
Mount the end cap and connection tube + :
Spray the screw-in connection and cogging of the supporting bracket with e.g. WD 40.
10 11
Screw upper casing to the supporting bracket.
Collector casing:
15
15
» Recommendation:
The casing may be mounted to the
supporting bracket even before inserting
the tubes, as the tube is lockable
by itself.
13
Installation instructions
•
SP-20
•
SP-30
Stiebel Eltron, Inc. 17 West Street West Hatfield, MA 01088
Telephone: 800.582.8423 | Fax: 413.247.3369 | [email protected] | www.stiebel-eltron-usa.com
Simply the Best