STIEBEL ELTRON S-Power PERFORMANCE SERIES Heat Pipe Collectors - Manual (Page 9)

General information:
The tube sets should be transported horizontally. Only up to max. 7 cartons may be stacked on
top of one and other. Our installation sets are valid for all snow load zones (except zone 3).
In storm areas, special structural analyses must be carried out.
Work safety information:
Wear a helmet, hearing protection and protective glasses! Attach fall protection equipment!
Handle glass tubes only while wearing gloves (are included).
13 13 27
30
Installation instructions for:
Required tools:
Possible installation types:
Facade, Pitch roof, Folded seam roof, corrugated metal roof
Caution!
The collectors are to be installed so that the distributor tube is in the top position.
Please make sure that the tubes are oriented towards the sun.
The min. and max. installation angle should be from 20° to 90°.
i
Tile roof
Facade
Connection
1
2
20 °
90 °
+
09
Installation instructions
•
SP-20
•
SP-30
Stiebel Eltron, Inc. 17 West Street West Hatfield, MA 01088
Telephone: 800.582.8423 | Fax: 413.247.3369 | [email protected] | www.stiebel-eltron-usa.com
Simply the Best
Simply the Best
S-Power
SP-20 S-Power
SP-20
Simply the Best
S-Power
SP-30 S-Power
SP-30