Installation instructions, Sp-20, Sp-30 – STIEBEL ELTRON S-Power PERFORMANCE SERIES Heat Pipe Collectors User Manual
Page 14
1
For all types of installations:
Mount the end cap.
+
16
17
20
19
18
Screw on the connections,
pull tight with a spanner and
push the insulation over the
corrugated hose.
16
17
i
Caution! The euro-conus connector or the sensor T-piece should always be mounted ont he
collector discharge side. For laterally-inverted connections, the adapter (Art.-No. 791069) should
be used.
+ +
18
19
20
21
22
23
On the left hand side: lubricate the o-ring of the collector connection with silicone grease, connect the
corrugated hose, push the side cap over the corrugated hose and mount. Following this pull the insula-
tion over the hose.
+ +
21
22
23
14
Installation instructions
•
SP-20
•
SP-30
Stiebel Eltron, Inc.
17 West Street
West Hatfield, MA
01088
Telephone: 800.582.8423 | Fax: 413.247.3369 | [email protected] | www.stiebel-eltron-usa.com