Som 7 si – STIEBEL ELTRON SOM 7 SI User Manual

Page 2

Advertising
background image

SOM 7 SI

© 08042 som_7_si.monen.in

dd

|

2

Contents

Imprint
Safety regulations ................................................................2
Technical data and overview of functions ........................3
1.

Installation .............................................................4

1.1

Mounting .................................................................................. 4

1.2

Electrical Connection ........................................................... 4

1.2.1

Data communication / Bus

............................................. 5

1.2.2

Standard Solar System .......................................................... 5

1.2.3

Solar System with Heat Exchange ..................................... 6

1.2.4

Solar System with After-Heating ........................................ 6

1.2.5

Solar System with Layered Tank Charge ........................... 7

1.2.6

2 Tank Solar System with Valve Logic ................................ 7

1.2.7

2 Tank Solar System with Pump Logic ............................... 8

1.2.8

Solar System with East-West Collectors ......................... 8

1.2.9

Solar System with After-Heating by Solid Fuel Boiler ... 9

1.2.10 Solar system with heating circuit return flow incr.......... 9
2.

Opearation and function ....................................10

2.1

Adjustment buttons ............................................................ 10

2.2

System monitoring display ................................................. 10

2.2.1

Channel indication ............................................................... 10

2.2.2

Tool bar .................................................................................. 10

2.2.3

System screen ....................................................................... 11

2.3

Blinking codes ....................................................................... 11

2.3.1

System-Screen Blinking codes ........................................... 11

2.3.2

LED blinking codes .............................................................. 11

3.

Primary commissioning ......................................12

4.

Control parameter and display channels ..........13

4.1

Channel overview ................................................................ 13

4.1.1-6 Indication channels .............................................................. 15
4.1.6-21 Adjustment channels ........................................................... 16
4.2

Recommended Settings .....................................21

5.

Troubleshooting Tips

6.

Warranty..............................................................28

...........................................23

Safety regulations:
Please read the following information carefully before
installing and operating the controller. When configuring the
controller please change the default settings as illustrated
in section 4.2. This will avoid damage to the solar system
by common problems such as overheating.

Installing the

controller using the default settings without making

any adjustments to the configuration parameters

is likely to result in an overheating condition of the

solar system at some point. Please also note that

changing the system scheme (Arr 1 - 9) will reset all

settings to the defaults. Please ensure that the mounting

is in accordance to local, state and federal regulations.

CU 72060171 01
UL 60730-1A:2002
CSA E60730.1:2002

US

US

C

C

Reprinting / copying
This installation manual in its entirety is copyrighted.
Another use outside the copyright requires the approval
of STIEBEL-ELTRON Inc. This especially applies for copies,
translations, micro films and the storage into electronic
systems.
Editor: STIEBEL-ELTRON Inc.

Important notice:

Your own calculations and plans under consideration of

the current norms and DIN-directions should primarily

be basis for your projects. We don´t offer a guarantee

for the completeness of the drawings and texts of this

manual - they only represent some examples. They can

only be used at your own risk. No liability is assumed

for incorrect, incomplete or false information and the

resulting damages.

.

Advertising