Cradlepoint WIPIPE MBR1000 - Manual (Page 15)

CradlePoint MBR1000 | USER MANUAL Firmware ver. 1.6.9
© 2010 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 13
3.4.3 My Wi-Fi-enabled Devices Can‟t Get Past the Login Page
Some electronic devices may experience problems handling the Internet Access User Login setting. Devices that commonly have trouble are, but
not limited to:
 iPod Touch

iPhone

Wireless VoIP Phones
 Wireless Printers

Most Wi-Fi-enabled Video Game Systems

Most Wi-Fi-enabled Devices that are not PCs or Macs
To Allow These Devices Access, follow the instructions below to disable the user login.
 Access your router administration page by opening your browser and typing http://192.168.0.1 in the address bar.

Go to the TOOLS tab on the top navigation, then the USER LOGIN menu on the left panel.
 Uncheck the REQUIRE USER LOGIN check box.

Scroll to the top of the page and click SAVE THE SETTINGS , which will save and reboot the router with your new configuration.
NOTE: Because the User Login page adds security and access control to others connected to your router, you may need to enable additional
security features such as WEP, WPA, or MAC Address Filtering (if you are not already doing so) when turning off the User Login Page. See the
“Setting Wi-Fi Security on your CradlePoint Router” section of this guide for details.