Cradlepoint WIPIPE MBR1000 - Manual (Page 79)

CradlePoint MBR1000 | USER MANUAL Firmware ver. 1.6.9
© 2010 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 77
6.2.3 Map Settings
Load Coordinates into map. (Default: enabled). GPS
page reads valid GPS coordinates from the router and
displays the location using an online mapping service in a
separate browser window.
Choose Map Provider. Drop down enables you to choose
which online mapping service you have the GPS
coordinates sent to.
These selections can be saved by clicking the Save
Settings button at the top of the page.
6.2.4 GPS Network Access
Enable GPS Network Port. (Default: disabled). When
checked the router makes live GPS data available over the
local/wireless network. The GPS data can be read from
port 8889 of the router when this option is enabled.
Enable GPS Network Port on WAN. (Default: disabled). When checked
the router makes live GPS data available to the WAN.
GPS data is presented in both NMEA 0183 sentences and Keyhole Markup
Language (KML) formatted data. To get NMEA data into a GPS aware
application you may need an extra piece of software that can bridge the
network NMEA data into a virtual serial port that the GPS application
connects to. HTTP requests to the GPS port will return data formatted in
KML for use in KML enabled GPS applications. Both NMEA and KML data
can be requested simultaneously by multiple users.
This selection is saved by clicking the Save Settings button at the top of the
page. After saving this option you must reboot the router for the change to
have effect.