Cradlepoint WIPIPE MBR1000 - Manual (Page 56)

CradlePoint MBR1000 | USER MANUAL Firmware ver. 1.6.9
© 2010 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 54
5.8.2 Routes List
The section shows the current routing table entries. Certain
required routes are predefined and cannot be changed.
Routes that you add can be changed by clicking the Edit
icon or can be deleted by clicking the Delete icon. When
Routes List section you click the Edit icon, the item is
highlighted, and the Routes List section is activated for
editing. Click the Enable check box at the left to directly acti-
vate or de-activate the entry.
The router must reboot before new settings will take effect.
You will be prompted to Reboot the Device or Continue. If
you need to make additional settings changes, click
Continue. If you are finished with all configuration settings,
click the Reboot the Device button.
5.8.3 Existing Routes
Shows the routes that are in place already, some of which will be dynamically generated by the system and labeled “System” the Creator field).
Thos
e created by the user will be labeled “User” in the Creator field. To overwrite these values, simply click on the field of information you wish to
change and re-enter the route information with the desired value changed.