Cradlepoint WIPIPE MBR1000 - Manual (Page 29)

CradlePoint MBR1000 | USER MANUAL Firmware ver. 1.6.9
© 2010 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 27
4.5.3 Dynamic (DHCP) Internet Connection Type.
You will not need to complete this section unless your ISP requires
you to.
Host Name. Enter the host name provided to you by your ISP.
Use Unicasting. Select the check box if advised to so by your ISP.
MTU. Enter the MTU provided to you by your ISP (default: 1500).
MAC Address. To input the MAC address of your system, enter it
manually or connect to the MBR1000 ‟s Web-Management interface
from the system and click the Clone Your PC’s MAC Address
button.
4.5.4 DNS Settings
Use the WAN Configuration sub-menu to configure the network
settings for the Wired and Cellular Modem WAN (the first connected
cellular handset or modem).
DNS Address. Select the Get Automatically from ISP/Cellular
Provider
radio button to acquire a DNS Address automatically from
our ISP/Cellular Provider or select the Use the Following DNS
Servers
radio button to specify DNS Servers. NOTE: You would
specify DNS Servers if you want Wi-Fi clients to access DNS
servers that you use for customized addressing or if you have a
local DNS server on your network.
Primary DNS Server. If you choose to use specify your DNS
Servers, then enter the IP address of the server you want as your Primary DNS Server in this field.
Secondary DNS Server. If you choose to use specify your DNS Servers, then enter the IP address of the server you want as your Secondary
DNS Server in this field.