Cradlepoint WIPIPE MBR1000 User Manual
Page 84
CradlePoint MBR1000 | USER MANUAL Firmware ver. 1.6.9
© 2010 CRADLEPOINT, INC. PLEASE VISIT
HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
FOR MORE HELP AND RESOURCES
PAGE 82
Band Select. This function is currently supported only on Sierra
Wireless modems. It allows you to select specific frequency bands to
use, either GSM (2.5G network) or WCDMA (3G network) settings, or
the use of "Autoband", which is automatic band selection. Depending on
your location, different network selections will be shown based on the
bands the particular modem supports and the router recognizes. If you
select one of the WCDMA settings such as "WCDMA/GSM NA (North
America)", the modem will use the 3G network in preference to the 2.5G
network. This change is persistent and stays with the modem, even if
you unplug it and move it to a PC. The band currently selected by the
modem will be marked with an asterisk (*) in the drop-down list.
WiMAX Realm Select. If you are using a 4G modem you must select
the WiMAX realm. This allows you to connect to your carrier: ie. Sprint.