360 Systems 1200HD-EX - Manual (Page 115)

Page 114 MAXX-1200 Owner’s Manual
Gigabit Ethernet Indicators
The Gigabit Ethernet Port has the following indicator lights:
Label Indication Meaning
Green on The port is connected to a valid link partner
Green flashing Data activity
ACT/LNK
(Left)
Off No link
Off 10 Mb/sec
Green 100 Mb/sec
10=OFF
100=GREEN
1000=YELLOW
(Right)
Yellow 1000 Mb/sec
Access to Components
Be certain to shut down the server, turn off the rear panel power switch and
disconnect the power cord before opening the unit for service.
The following sections provide instruction on disassembly and re-assembly for maintenance.
Removing the Front Panel
The front panel is easily removed for access to the four disk drives, or for removing the server
from an equipment rack. Using a coin or a flat-blade screwdriver, unscrew the two large panel
fasteners on the left and right sides of the front panel. Lift the cover off.
To re-install the front panel, verify that all wires are within the chassis, then place the front
panel into position and tighten the front panel access screws just enough to be snug.
Removing the Top Cover
Use a No. 2 Philips head screwdriver to remove screws attaching the top cover, then lift it off.