Factory repair policy, Regulatory certifications – 360 Systems 1200HD-EX User Manual
Page 122
MAXX-1200 Owner’s Manual
Page 121
Factory Repair Policy
A video server being returned under warranty shall be sent to 360 Systems, freight prepaid,
in the original or equivalent packaging. Call 360 Systems for a return authorization number before
returning a product. Have your serial number and software version number available for reference.
Use the following address for shipping and correspondence. 360 Systems’ offices are open
Monday through Friday, from 8:30 AM to 5:00 PM, Pacific Time.
360 Systems
Telephone (818) 991-0360
Customer Service Dept.
Fax
(818) 991-1360
3281 Grande Vista Drive
Newbury Park, CA 91320
Website
www.360systems.com
Regulatory Certifications
Safety
The server was tested by ETL Intertek and found to comply with the following safety standards:
UL60065, Issue:2003/06/30 Ed:7 Rev2007/12/11, Standard for Safety for Audio, Video and
Similar Electronic Apparatus – Safety Requirements
CSA C22.2#60065, Issued:2003/04/01 Ed:1, Audio, Video and Similar Electronic Apparatus –
Safety Requirements – IEC 60065:2001; Supercedes E60065-00-CAN/CSA; Amendment 1:
April 2006 – (R2007)
Radio Interference Compliance
Radio Interference (USA)
WARNING: This equipment has been tested and found to comply with the limits for Class A
digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction's manual, may cause
interference to radio communications. Operation of this equipment in a residential area is
likely to cause interference in which case the user will be required to correct the interference at
his own expense.
The user is cautioned that changes and modifications made to the equipment without approval
of the manufacturer could void the user's authority to operate this equipment.
It is suggested that the user use only shielded and grounded cables to ensure compliance with
FCC Rules.
FCC Emission Limits
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesirable operation.