360 Systems 1200HD-EX - Manual (Page 66)

MAXX-1200 Owner’s Manual Page 65
Editing Playlists
Removing Clip from Playlist
To remove a Clip from a Playlist:
• Make sure the clip to be removed is not
PLAYING or CUED
• Position the cursor over the Clip and right-click. Select REMOVE from the pulldown menu.
Removing All Clips Above or Below the Selected Clip
All clips above or below the selected clip can be removed unless a CUED or PLAYING clip is
affected. These options will “grey out” if removal is not allowed for this reason.
To Remove All clips above a selected clip:
• Move the cursor over the clip to select it
• Right click the mouse and select
Remove All Above from the pulldown menu.
To Remove All clips below a selected clip:
• Move the cursor over the clip to select it
• Right click the mouse and select
Remove All Below from the pulldown menu.
Inserting a HOLD into a Playlist
The HOLD command inserts a hold (wait) event in a Playlist immediately before the selected
clip. The PLAY or JUMP command will restart a Playlist after it has stopped on a HOLD line.
The HOLD command is also available in the Playlist Item Context Menu, accessed by right-
clicking in the Playlist item window. If a Programmed Start Time has been set and is armed, the
Playlist will resume when the Programmed Start Time occurs. See Page 62 for instructions on
setting a programmed start time.
Appending a Playlist (FILE >APPEND)
Make sure the EDIT checkbox is checked in the Playlist View window. Click FILE >APPEND
from the Playlist View to bring up the list of available Playlists. Double-click on a playlist to load
it. It will appear at the end of the list after a label event that shows the name of the appended
list. This operation can be performed during playback, allowing a new playlist to be loaded
without interruption of programming.