Making a crash recording, Making a named recording – 360 Systems 1200HD-EX User Manual
Page 43
Page 42
MAXX-1200 Owner’s Manual
Making a Crash Recording
Press Record whenever Channel 1 reports that it is IDLE. A filename will be created starting with
“new” and the date and ending with a take number, and the recording will start immediately.
Making a Named Recording
A.
From the Channel 1 Transport Window, Select FILE>NEW. The dialog of Figure 7 appears.
Figure 7 - Channel 1 Clip Navigator "New" mode
B.
Enter a clip name using the keyboard. Up to 31 characters may be used. Spaces are allowed;
however, some characters other than upper or lower case letters and numbers may not be
used. These characters will not enter into the name field when typed. They include * ( ) + =
; : ‘ “ < > , . / and ? A list of existing clips will appear in the large window, and can be used
as a name reference when creating new clip names.
C.
The Channel 1 transport Window will display the words IDLE CUEING for two seconds or
less. When ready to record, the Channel 1 Transport Window will display IDLE READY.
Note: File naming is case sensitive. Upper case letters sort before lower case. The name FILE sorts
in the order shown, based on differing capitalization: FILE, File, fiLe, and file. When using the
server with automation systems or other remote controls, it is not a good practice to distinguish files
only by differences in case.