360 Systems 1200HD-EX - Manual (Page 54)

MAXX-1200 Owner’s Manual Page 53
Configuring the Network
The server provides a number of user settings that configure it for use as a practical network.
These will be found on the Configure Network tab shown below.
The NET-1 Ethernet port on the server has a unique IP Address. In this way, each server can be
identified on the network.
Network Settings Tab
Use the server graphic user interface to configure network communication settings. From the
Main Menu selection bar at the top of the screen.
Click EDIT >CONFIGURE >NETWORK
The screen of Figure 13 is displayed.
Figure 13 - Network Configuration Screen
The server is shipped with a default network Host Name and IP Address. Qualified network
engineers may change these configurations to suit your specific network environment. Factory
defaults for networking are:
• Network Disabled
• Use DHCP