360 Systems DigiCart/E - Manual (Page 33)

Setup and Utility Menus • • • • 23
Chapter 4
Setup and Utility Menus
Menu Navigation
The SETUP menu defines the operational behavior of your DigiCart/E when recording and playing cuts and
includes functions relating to general machine usage. After selecting SETUP, use the navigation arrow
buttons or rotate the selection knob to view your options. Setup options are displayed alphabetically in a
rotating list. Press the
ENTER button to initiate the chosen function. Press EXIT to terminate the selection.
Press SETUP to exit all setup menus.
Setup parameters are stored on DigiCart’s internal hard disk when you exit the Setup menu. If power is lost
while in the Setup menu, parameter changes may be lost. The button illuminates while in Setup mode.
The UTILITY button is used to access functions such as Hot Keys, Copy, Rename, Delete, and disk format
operations. After selecting UTILITY, use the navigation arrow buttons or rotate the selection knob to view
your options. Utility options are displayed alphabetically in a rotating list. Press the
ENTER button to
initiate the chosen function. Press EXIT to terminate the selection. Press UTILITY to exit all utility menus.
Utility menu settings are stored in temporary memory. For example, if you need to repeat a copy operation,
that option will be displayed first upon subsequent presses of the
UTILITY button. The button illuminates
while in Utility mode.
Setup Menu Features
D-N ET R ECEIVER
Setting this parameter ON configures the digital audio I/O ports to be a D-Net receiver.
The following four parameters appear only if D-NET Receiver is ON:
D-NET R ECEIVER I NPUT
Setting this parameter configures either the BNC or AES-3 digital audio I/O ports to be the D-Net
receiver port.
D-NET R ECEIVER D IR
Setting this parameter configures the D-Net receiver target directory to ANY or MAILBOX ONLY,
DIR 9.
D-NET R ECEIVER N AME
Setting this parameter configures the D-Net receiver to NONE - RECEIVE ALL or <current name>.