360 Systems DigiCart/E - Manual (Page 39)

Setup and Utility Menus • • • • 29
S ET IP A DDRESS
• AUTOMATIC
• 192.168.1.16 – 31, 192.168.2.16-31
DigiCart/E can automatically set its IP address using network DHCP services. If DigiCart is running on a
network where the server cannot provide DCHP service, (e.g. when a Network Attached Storage device is
the server), the IP address can be set manually. One of thirty-two addresses can be selected in the range of
192.168.1.16 to 192.168.1.31 or 192.168.2.16 to 192.168.2.31. The factory default setting is
AUTOMATIC.
S ET K EYBOARD T YPE
• MINI
• STANDARD
Full size and miniature keyboards use different key codes because of key overlaps. This menu item
provides a setup for the standard 101-Key AT-style keyboard or small footprint mini-keyboards (RC-205)
or infrared-linked mini-keyboards (RC-235). Contact your 360 Systems dealer for details on these
accessories.
NOTE: The keyboard must be connected at the time of power-up, or it will not be recognized.
Keyboard Mapping Assignments
The chart below shows mapping of keys to DigiCart/E functions. Function keys F1 through F12 and arrow
keys emulate front panel buttons and the selection knob for remote control of all DigiCart/E functions.
KEY
FUNCTIONS ON
MINI-KEYBOARDS
FUNCTIONS ON
101-Key KEYBOARDS
F1 UTILITY MENU UTILITY MENU
F2 SETUP MENU SETUP MENU
F3 EDIT MENU EDIT MENU
F4 VIEW LIST VIEW LIST
F5 FIND PAUSE
F6 PAUSE LOOP
F7 LOOP SECONDARY
F8 RECORD D-NET XFER
F9 STOP FIND
F10 PLAY RECORD
F11* SECONDARY STOP
F12* D-NET XFER PLAY
UP ARROW SELECTION KNOB CW SELECTION KNOB CW
DOWN ARROW SELECTION KNOB CCW SELECTION KNOB CCW
LEFT ARROW LEFT NAVIGATION ARROW LEFT NAVIGATION ARROW
RIGHT ARROW RIGHT NAVIGATION ARROW RIGHT NAVIGATION ARROW
ENTER / RETURN ENTER ENTER
ESCAPE EXIT EXIT
0 - 9 INDEX NUMBER LOCATORS INDEX NUMBER LOCATORS
SCROLL LOCK TOGGLE HOT KEY ENABLE TOGGLE HOT KEY ENABLE
NOTE: F11 and F12 are Shifted keys on mini-keyboards.