360 Systems DigiCart/E - Manual (Page 59)

Playback • • • • 49
(NOTE: Because the viewable list represents events in the queue, the currently playing event
will not read out as cut #1, only the events that follow will be listed. Once the list is saved,
the current event will be #1 and all others will read in order.)
Release PAUSE (or press the MAKE PLAYLIST button on an RC-320 remote) to play the
Quickstack. The top line of the command display shows the last item in the Playlist, the bottom line
presents the current item and its timing information.
While playing, use the VIEW LIST button and selection knob to see the remaining items in the list. The
number at the upper left shows how many items the top line event is away from the selection currently
playing.
Pause and Loop may be used while Playlists are running. At any time during playout of a Quickstack,
you may press the
LOOP button. The current selection will repeat until Loop is disengaged. Refer to
button operational descriptions in Chapter 2, Control Panel.