ANKOM TDF Dietary - Manual (Page 79)

Operator’s Manual
Rev E 12/2/14
pg. 79
Service Mode – IDF Count
When you press the IDF Count button on the Service Mode screen, the following screen will be displayed.
From this screen, you can see the number of digestion operations that have been done on this instrument.
Service Mode – AOAC 2009.01/2011.25 Registration
When you purchase the upgrade to Total Integrated Dietary Fiber, ANKOM Technology will provide you with a registration
number that you will use to configure your instrument to run the AOAC 2009.01 and 2011.25 methods. When you press the
AOAC 2009.01/2011.25 Registration button on the Service Mode screen, the following screen will be displayed.
To enable the AOAC 2009.01/2011.25 methods, enter the 5-digit registration number provided by ANKOM Technology in the
white box with the gray border and press the
SET button. If you enter an incorrect number, the instrument will tell you to try
again.
AOAC 2009.01/2011.25 Registration
←
xxxxx
SET
Enter registration number, then press SET.
IDF Count
←
Number of IDF runs
XX